Installing Windows 7 in Acer Aspire One using 4gb USB pendrive

What you'll need

• 4gb USB drive
• Acer aspire one with hardisk capacity of 80gb or above
• UltraISO
• Windows 7 installer
  

You can use any ISO maker but I suggest to use UltraISO as your image maker because it worked for me flawlessly. You can get the UltraISO for free in http://www.ezbsystems.com/ultraiso/ no need to register. After downloading and installing the UltraISO you can now open the Windows 7 installer(iso). In my case my installer is named en_windows_7_ultimate_x86_dvd_x15-65921.iso. Just right click the installer file and open with UltraISO.

By opening it with UltraISO there's an option to make the installer to be bootable with your 4gb USB pendrive. At the upper tab select Bootable and Write Disk Image.

Select your formatted 4gb USB drive (fat32/ntfs either of the two will work but i used fat32 format) and press write. Leave the write method to USB-HDD+ and press write.

It may take too long to finish depending on your computer's speed. After It's done you can now start the Installation on your cool Acer Asire One. Actualy, this tutorial is applicable on almost any netbook in the market right now. Same steps of course but I want to patronize my own netbook that's why I used it as an example for this tutorial.

Restart the computer and press F12 upon boot to go Boot Option Menu. Select your 4gb USB Drive with the disk image of windows 7 in the list and press enter. The windows 7 installation should start up. I suggest to partition your hd drive 40-50gb for the windows installation drive and the remaining is for your back up. In my case I have a 160gb model of Acer aspire one so i partitioned mine in 50gb, 110gb.

Just finish the installation process and it will work fine. You don't need to install any drivers for your acer aspire one. It all works fine with out installing any of the drivers like wireless device driver, graphic driver, webcam etc.

Now, enjoy using Windows 7 in your Acer aspire one. It's fast compared to windows vista and windows xp. Believe me. Im using just 1gb ram on my Acer aspire one. For any questions and concerns just comment and I would be happy to answer all of your questions regarding this tutorial.

My Oakwood Fatboy Hotsauce

Atlast! I got some shots of my oakwood fatboy complete a while ago. This deck is an ideal package for starters. This is my first wooden deck and luckily it's not local. It was given by my brother as a souvenir gift (Thank to Kuya Ebeth).

The package includes

• 29mm x 100mm Wooden deck
• Riptape
• TD Wide trucks
• O-rings
• Bushings and screws
• Stickers

The new mold of oakwood fatboy is medium concave, medium kicks which fits my playing style well.The o-rings set that is included on the package is sweet. The deck is stable as rock for more pop.

The package is worth 43$ including the shipping. Quite a nice price if you are in the US. Hahaha! All in all, It's a nice deck. I'll try to shoot some videos playing it.

Love God

Believing God doesn't require you to change anything. God loves you more than you know. Watch this video and reflect =)

Pinoy fingerboard community

Join us here : http://thepinoyfingerboard.forumotion.com/forum.htm

Additional to that, there's also a local distributor of wooden deck and some tuning parts here in the Philippines. The official site of railwood is this : http://www.railwoodramps.webs.com/ You might want to check it out. They sell wooden decks for a price range of 400Php to 500Php.

Unlocking Phenom II X2 and X3 Cores

What you'll need:

• Motherboard with SB710 Chipset or higher
• Phenom II X3 720 BE, Phenom II x2 550 BE
• Bios with ACC (Advanced Clock Calibration) feature
• Luck

In my case, I used Asus M4785TD-M EVO to unlock the 4th core of my lucky Phenom II X3. The unlocking process is very simple.

At startup, you have to go to BIOS by pressing "Delete" in my case or F12 on other motherboard. Then go to:

• Advanced Tab
• Selec CPU Configuration
• Set ACC to Auto
• Enable Unleashing Mode
• Set Active CPU Cores to 4 cores operation
• Save and Exit

 If your computer doesn't boot properly or reverted to its default bios settings then the 4th core is not yours. It may be defective or your processor doesn't belong to the lucky batch (you can check the lucky batch in the link below). If the computer boots up with no problem then you're almost good with your unlocked 4th core. A good way to check if the 4th core is unlocked is by running CPUZ or checking it in the task manager.

Unlocked:

Checkout the Code name, its Deneb. It's also the code name for some AMD Quad cores.

After unlocking the core, you may want to check the stability of your system by stress testing using Prime95, OCCT. Some Phenom II x3/x2 processors can be unlocked but not stable at all. Stress testing it for a minute will result a BSOD, hang, sudden shut off, etc. It's very important to check the stability of your system first to avoid any unwanted results.

Here are the detailed list of Phenom II series that can be unlocked:
http://www.overclock.net/amd-cpus/535501-amd-phenom-ii-core-unlocking-guide.html

I miss Boogie

I miss him, Boogie a.k.a. Flinstone is the son of  Ph. Grand Champion H.O.F. Sweeping Ears Idefix.

Meh

This is for you meh. Hindi ako makatulog, napagpasyahan ko gumawa ng blog hehehe! Gusto ko kase may record na ako ng lahat ng mga nangyayare sa buhay ko via online para incase mamatay ako, pwede mabasa nino man yung mga napagdaanan ko. Lalu na sa'yo meh =) Balak kong ipost dito lahat ng bago sa akin, gamit man o events atbp. Cool di ba? Gawa ka na din! Hahahah!

Natuwa ako dito. Nagbrowse ako ng photobucket ko, may backup pala ako nito. Nasa office ka na siguro nguan, sana mabasa mo 'toh. Share ko sa'yo via Facebook.

Site update

Updated the layout of the site a little bit. All credits are given for those who created the logos. I want the site to be clean and pleasant to the eyes.

Sagada for fun!

I was browsing my old HD drive and I saw these pictures of me and my girlfriend in Sagada Mountain Province. I missed our stay on Kuya Greg's Yabami Lodge, miss the lunch out at Yoghurt House, exciting and extreme adventures in Sumaging cave and Bomodok Falls.

Techdeck is back!

I'm a big fan of this hobby way back in highschool. Just got my new Techdeck last month and I'm addicted to it.



Almost =) I almost didn't sleep until 5am trying to recall every trick that I know since I was hooked in this toy. I'll be posting my newly delivered wooden deck that was given by my brother from US as soon as I get some shots of it.

Our Graduation Ceremony

Date: November 19, 2009
Venue: PICC (Roxas Blvd)

I'm very happy with the Ceremony, spent almost 6 years in accomplishing my associate and bachelors degree. I would like to thank everyone for making this ceremony memorable. My family who had been very supportive to me. My girlfriend.

Im on the stage:


Proud to be a Mapuan


With my friend, Nathaniel Madrilejo


Us


With Ermats

Present Rig

Yes! I got my rig last 2 weeks and I'm very happy with it. It was a graduation gift from my Nanay. To start of with my online container I'm going to review my own rig.



The casing is kinda old, It was a generic Tornado casing. It was my case since last 3 years. Just modded it to make it look nice, Added a personalize mesh on the HD Bay and added up some UV Quad LED fans. Hardware reviews will be posted as soon as i get a shot of each parts.

Lets see it inside:


Technical Specification:

• Phenom II x3 720 Black Edition
• Asus M4A785TD-M EVO Motherboard
• G Skill Ripjaw 4GB Dual DDR3 1600
• Palit GTX 260 Sonic 448bit
  
• Hec Cougar 550W
  

A better shot inside:

My online container is up =)

Decided to create my blog for personal use. Planning to fill this up with everything, both on online and offline hobbies.

Past events in my life will also be posted